Everactiv Heavy Duty Stainless Steel Grab Bar | Bathroom Grab Bar | Safety Hand Support Balance Handle Bars | 100% Stainless Steel (SS 304)
Rs. 612
Rs. 1,179 You save Rs. 566SKU: SEN245-ESSGB12
- Pan India Delivery
- COD, EMI & Prepaid Options
- Warranty & Exchange Support
- Ships within 24 Hours
- Free Delivery
Description
EVERACTIV · SUPPORT WITHIN REACH
A handhold nearby.
Where you need it.
A stainless steel grab bar for a carefully chosen spot.
Add a handhold beside a toilet, in a bathroom or along another suitable wall. This SS304 stainless steel bar has a textured matte grip and concealed screw covers. Choose a 9-inch, 12-inch or 18-inch length, then have the position and wall checked for proper installation.
SS304 stainless steelMatte grip3 length options
SS304 steelCorrosion-resistant bar
9 / 12 / 18 inChoose one length
Matte finishA textured handhold
Covered fixingsA clean, finished appearance
SUPPORT WITHIN YOUR REACH
Start with where you need a handhold.
The most useful position is one you can reach when you need support. This straight rail offers a simple handhold with covered mounting points, so you can plan it around your room and your movements.
CHOOSE THE POSITION WITH CARE
Vertical or horizontal.
Fitted to suit you.
You can install the bar vertically or horizontally where the wall and fixings are suitable. Work with an installer to choose a position that suits your reach and the space available.
Check before drilling
Have a suitable installer assess the wall, fixings and position, and follow the supplied installation instructions.
A CLOSER LOOK
Grip, material and finish.
MATERIAL
SS304 stainless steel
The SS304 stainless steel bar is designed to resist corrosion in bathroom use. Keep it clean and make sure it is properly installed.
GRIP
A matte surface to hold
The matte surface gives you a textured area to hold. Keep it free of soap residue and follow the care instructions.
FINISH
Concealed screw covers
Round covers conceal the mounting screws, giving each end a neat finish alongside your bathroom fittings.
FROM ONE END TO THE OTHER
Curved ends.
Covered mounting points.
The curved ends meet round mounting plates with grooved fittings. Once the bar is properly fixed to the wall, the covers hide the mounting points.
9-inch option
The shortest of the three available lengths.
12-inch option
The middle length in this range.
18-inch option
The longest of the three available lengths.
Select your length above, then confirm the exact mounting measurements before any drilling.
BEFORE AND AFTER INSTALLATION
A good fit starts with the wall.
01
Choose the position
Choose a length and position for where you need hand support. Check your reach and the mounting measurements before fitting.
02
Arrange proper fitting
Ask a suitable installer to check the wall and select appropriate fixings, following the supplied instructions.
03
Check and maintain
Clean the bar and check regularly for movement, loose fittings or damage. Stop using it if it moves or is damaged, and have it checked.
The whole installation matters
The support you get depends on the wall, fixings and correct fitting together. Ask us to confirm the permitted load and suitability before you buy.
AT A GLANCE
Your grab bar, at a glance.
- Product type
- Straight wall-mounted grab bar
- Bar material
- SS304 stainless steel
- Finish
- Textured matte finish
- Listed lengths
- 9 inches, 12 inches or 18 inches; separate variants
- End design
- Curved ends with round mounting plates
- Screw covers
- Concealed covers at both ends
- Orientation
- Vertical or horizontal, subject to suitable installation
- Installation
- Wall-mounted; wall and fixings must be suitable
A FEW HELPFUL ANSWERS
Questions before fitting.
Which lengths can I choose?
Choose a 9-inch, 12-inch or 18-inch bar from the options above. Check the mounting measurements for the position you have in mind.
Can it be fitted vertically or horizontally?
Yes, both positions are shown for this bar. Ask your installer to choose a suitable position based on your needs and the wall structure.
Can I attach it to any wall?
The wall and fixings need to be assessed first. Tiles or a surface finish alone do not establish whether the wall can provide the support needed.
What weight can it support?
Ask us to confirm the permitted load and installation requirements before ordering. The wall structure and correct fixings also determine whether the installation is suitable.
Are screws and fixings included?
Check with our team to confirm what hardware is supplied. Your installer will need to choose fixings appropriate for your wall.
EVERACTIV SUPPORT
We can help with the measurements.
Ask us about bar lengths, mounting dimensions, supplied hardware or care before you arrange installation.